Xiaomi Mi 9 Se imei Repair Solution without any box free for all
Xioami Mi 9 SE IMEI Method
Bootlock must be turned on.
First off the all need to dowload all the links.
Install the top twrp.
To do this, take the fastboot mode and
fastboot flash recovery recovery on the CMD screen
TWRP will pop up after I have given the link of the magisk installden into memory.
Restart device becomes root.
Then make a backup with qpst and xqcn. To do this, enter the following commands into the CMD screen.
adb shell su setprop sys.usb.config diag,adb
Type diagnostics. You need to have Qualcomm usb drivers installed on your computer. You should see the diagnostics port in the device manager.
Open the Qpst program and start the client from the top, then press software download.
Make a backup of xqcn from the Back-Up section. When finished, enter twrp again into the advanced terminal and delete the blocks.
dd if=/dev/zero of=/dev/block/sdf6 dd if=/dev/zero of=/dev/block/sdf7 dd if=/dev/zero of=/dev/block/sde33
Then open the device again and turn the diag on again with commands.
Then do IMEI repair with dual writer IMEI program.
Then restore the xqcn backup you received with the Qpst program and restart it.
Things to note Do not reset deleting IMEI if reset with original recovery.
No problems with the update.
Resetting with Twrp will not delete the IMEI.
I hope that in the near time .. Because
we try to help you make the subject under review where you are stuck.